OTR tyres for loaders, graders, dumpers and cranes
Off-the-road tyres for construction, quarry and material-handling equipment. Tell us the size on the sidewall and the job the machine does, and we will quote what is available now, with delivery to your site.
OTR tyres are expensive, slow to replace and the difference between a machine that works and one that sits waiting. Most of the calls we get are from plant managers and procurement officers with a machine already down, so the first thing we do is confirm the exact size, ply rating and tread type before we quote. A cheaper tyre with the wrong tread code costs more by the end of the month.
We supply both bias (cross-ply) and radial OTR tyres. Bias tyres are still the default on most Pakistani loaders and graders because they tolerate sidewall knocks on rough sites and cost less up front. Radials make sense on longer haul cycles and on machines that run two shifts. If you are unsure which suits your operation, ask; we would rather spend ten minutes on the phone than sell you the wrong set.
Sizes we are regularly asked for
Availability and brand change with each shipment, so we confirm both when we quote. If your size is not listed, ask anyway.
| Size | Typical fit | Construction | Price |
|---|---|---|---|
| 17.5-25 | Wheel loaders (3-ton class), larger graders | Bias & radial | |
| 20.5-25 | Wheel loaders (4-ton class), rough-terrain cranes | Bias & radial | |
| 23.5-25 | Wheel loaders (5-ton class), articulated dumpers | Bias & radial | |
| 26.5-25 | Large loaders, quarry face work | Bias & radial | |
| 13.00-24 / 14.00-24 | Motor graders, mobile cranes | Bias | |
| 16/70-24, 16/70-20 | Compact loaders, telehandlers | Bias | |
| 12.5/80-18 | Backhoe loaders (front) | Bias | |
| 16.9-28 | Backhoe loaders (rear) | Bias | |
| 10-16.5, 12-16.5 | Skid-steer loaders | Bias | |
| 23.1-26 | Single-drum vibratory rollers | Bias | |
| 18.00-25 | Reach stackers, port and yard handlers | Bias | |
| 18.00-33 | Rigid dump trucks (35 to 40 t) | Bias & radial |
Where these tyres work
Wheel loaders
Stockpile loading, crush plants, batching plants, quarry faces. Tread choice (L2, L3, L4, L5) matters more here than on any other machine.
Motor graders
Road building, haul-road maintenance, site levelling. Usually G2 traction or G3 rock tread.
Backhoe loaders
Utility work, trenching, small sites. Front and rear sizes differ, so quote both.
Dump trucks
Rigid and articulated haulers on quarry and mining roads, where heat build-up and cuts are the main killers.
Rollers & compactors
Drive tyres on single-drum rollers and smooth tyres on pneumatic rollers.
Cranes & handlers
Rough-terrain cranes, reach stackers and yard handlers that carry high static loads.
Questions about otr tyres
17.5 is the nominal section width in inches and 25 is the rim diameter in inches. The dash means bias (cross-ply) construction; a radial of the same size is written 17.5R25. Our OTR size guide explains the full sidewall marking.
Yes. We dispatch nationwide by road. Tell us the site location when you ask for a quote and we will include the delivery arrangement and timing.
We supply both bias and radial OTR tyres. Radial availability varies by size, so we confirm it at the time of your quote.
There is no fixed minimum. Pricing depends on size and quantity, and project or fleet orders are quoted individually. Send your list and we will price it as one order.
By industry
Guides for otr tyres
Buying Tyres in Bulk for a Project: A Procurement Checklist
Most tyre disputes start with a vague enquiry. A one-page checklist that gets you comparable quotes and the tyres you actually meant to order.
ReadHow to Cut OTR Tyre Cost per Hour: 9 Habits That Actually Work
The cheapest tyre is rarely the cheapest per hour. Nine habits that stretch tyre life on loaders, graders and dumpers, most of which cost nothing.
ReadWheel Loader Tyres: Choosing Size and Tread for Pakistani Sites
A 5-ton loader at a crusher and the same loader at a limestone face need different tyres. A guide for plant managers and site engineers.
ReadSend us your size list. We will price it as one order.
Quotes usually go out within one business day. Machine down today? Call the sales line or WhatsApp a photo of the sidewall.